Príspevok
Characterization methodology for vapor injection scroll compressors of variable speed
DOI: 10.18462/iir.compr.2021.0416
Sekcia: Rotary, scroll, screw compressors 1
Stav prijatia: Príspevok prijatý
Autori
| Meno | Organizácia | |
|---|---|---|
| Emilio Navarro-Peris, Prof. | Universitat Politecnica de Valencia, Spain | |
| Jose M. Corberan, Prof. | Universitat Politecnica de Valencia, Spain | |
| Fernando M. Tello-Oquendo, Dr. Eng. | Escuela Superior Politécnica de Chimborazo, Riobamba, Ecuador | |
| Daniela C. Vásconez-Núñez, Dr. Eng. | Escuela Superior Politécnica de Chimborazo, Riobamba, Ecuador |
Abstrakt
Scroll compressor with vapor injection (SCVI) is one of the most used technologies in refrigeration systems and heat pumps that work with high pressure ratios. Nevertheless the standard for this type of compressors is not system independent and lacks of generality.
In this work a methodology for the characterization of this type of compressors is presented. The proposed methodology allows the compressor characterization using a calorimetric test bench and independently of the used injection system. The methodology is based on the development of a correlation for the intermediate conditions as a function of the injection mass flow and the compressor speed. This correlation was obtained with an SCVI using R-407C as a refrigerant. In order to evaluate the confidence of the obtained results a set of tests was performed with a VS-SCVI working with R-290 as a refrigerant. Finall, based on that, an experimental analysis of the intermediate conditions for scroll compressors with variable speed steam injection (VS-SCVI) is presented.
Kľúčové slová
Characterization methodology; scroll compressor; vapor injection; Calorimetric test bench; variable speed