Príspevok
Thermodynamic Analysis Of Zeotropy Mixtures For Ejection Refrigeration Cycle
DOI: 10.18462/iir.compr.2021.0423
Sekcia: Ejectors and centrifugal compressors 2
Stav prijatia: Príspevok prijatý
Autori
Meno | Organizácia | |
---|---|---|
Paweł Jakonczuk, M.Sc. | Bialystok University of Technology, Faculty of Mechanical Engineering, Bialystok, Poland | |
Kamil Smierciew, PhD, DSc | Bialystok University of Technology, Faculty of Mechanical Engineering, Bialystok, Poland | |
Dariusz Butrymowicz, Prof. | Bialystok University of Technology, Faculty of Mechanical Engineering, Bialystok, Poland |
Abstrakt
The conventional refrigeration ejector cycle utilizes constant temperature process during motive heat consumption needed for vapor generation. This may be thought as the main restriction since it results in required significant mass flow rate with small temperature drop of a heating fluid. In contrary, the large change of temperature and small flow rate of the water in order to provide required heat flux is more economically advantageous. In some cases, however, either requirements can not be fulfilled. One of the possible approaches to reduce this restriction is application of a zeotropic mixture as the working fluid for the conventional ejector cycle. The paper deals with thermodynamic analysis of low GWP refrigerant mixtures applied for ejection cycle. The results show that depending on the type and proportion of mixed refrigerants the temperature of the heating medium change from 5 to 25 K and more.
Kľúčové slová
ejection system,
COP,
zeotropy,
refrigerant,
system performance