As a contact person of your company, you have the ability to act on behalf of another employee. By selecting an employee from the list above and clicking Confirm, you will enter the account of the selected employee just as if you had known the password. To return to your account, click Return to your profile.
Virtual Lobby
Welcome to the virtual lobby for IIR Conference on Compressors and Refrigerants!
Here you can choose from one of the sessions below and join the presenters at the planned time slots. You will also be able to access recorded presentations after the conference.
All times are given in Central European Time.9.9.2024
Plenary session
auditorium, S2, chaired by Peter Tomlein, Didier Coulomb, Armin Hafner, 15:00 – 18:00
Submissions |
---|
Challenges of the COP 28 and the National Cooling Action Plans |
Presented by Didier Coulomb, Director |
Why clean cooling is the preferred solution in Norway |
Presented by Armin Hafner, Prof. Dr.-Ing. |
The Feasibility of a Global Net Zero for RACHP in 2050; the Impact of Main Parameters |
Presented by Lambert Kuijpers, Dr. |
What will the future be for the refrigeration and heat pump technology? |
Presented by Alexander Cohr Pachai |
Decarbonizing mid-size industrial application with large scroll compressors: vision and challenges |
Presented by Ivan Rangelov |
Compressors and refrigerants in electronic logbook "Leaklog" |
Presented by Michal Tomlein, Ing. |
Professor Aurel Stodola, Polymath and big personality. Commemorative Medals of Aurel Stodola will be awarded |
Presented by Ľubomír Šoóš, Prof. Dr. h.c. |
10.9.2024
Reciprocating compressors I
auditorium S2, 1.floor, chaired Steffen Feja, Marek Zgliczynski, 09:00 – 10:30
Submissions |
---|
ARE THE PRODUCT SAFETY STANDARS READY TO ALLOW IMPLEMENTATION OF UPDATED F-GAS REGULATIONS FOR COMMERCIAL REFRIGERATION? |
Presented by Marek Zgliczynski |
Hermetic compressor valve robust design assessment |
Presented by Mattias da Silva Castro |
Quantifying Inefficiencies in Variable-Speed Reciprocating Compressors: An Exergy Approach |
Presented by Willian T. F. D. Silva, M.Sc. |
A Modelica-Based Framework for Thermal Simulation and Performance Analysis of Hermetic Reciprocating Compressors |
Presented by Vitor M. Braga, Ph.D. |
Characterizing Sources of Volumetric Inefficiency in Reciprocating Compressors |
Presented by Willian T. F. D. Silva, M.Sc. |
Heat pumps I
auditorium S3, 1. floor, chaired by Alex Cohr Pachai, Claudia Fabiane, 09:00 – 10:30
Submissions |
---|
R290 - 1,8 MW CHILLER AND HEAT PUMP SYSTEM |
Presented by Armin Hafner, Prof. Dr.-Ing. |
THE POTENTIAL OF MULTI-PHASE ROTARY PRESSURE EXCHANGER INTEGRATION FOR LARGE-SCALE TRANSCRITICAL CO2 HEAT PUMPS |
Presented by Caio Coutto, MSc |
Design and control strategy of an innovative CO2 residential monoblock heat pump for domestic hot water |
Presented by Claudia FIABANE |
High Temperature Heat pump applications for industrial processes |
Presented by Ivan Rangelov |
State of the art of miniature compressors |
Presented by Mihael Blatnik, MSc |
Analysis of methods to improve the energy efficiency for sustainable marine solutions |
Presented by Mykhailo Khmelniuk, Doctor of Technical Sciences |
Reciprocating compressors II
auditorium S2, 1. floor, chaired by Marek Zgliczynski, Steffen Feja, 11:00 – 12:30
Submissions |
---|
Cold thermal energy storage for supermarket applications: Numerical investigation |
Presented by Armin Hafner |
Heat powered adsorption compressors for refrigeration and air-conditioning applications. |
Presented by Sujod Iraqi, MSc |
Thermocouple influence on Heat Transfer Coefficient measurement |
Presented by Patrik Rapta, Ing. |
Isothermal gas compression and expansion processes by controlling actuators |
Presented by Török Arpad, researcher |
DOMESTIC REFRIGERATORS SINGLE-PHASE ASYNCHRONOUS MOTORS DYNAMIC CHARACTERISTICS SIMULATION |
Presented by Yurii Baidak, DSc |
Compressors and technologies
auditorium S3, 1. floor, chaired by Dariusz Butrymowicz, Alex Cohr Pachai, 11:00 – 12:30
Submissions |
---|
Analysis of various refrigerants in lower condensing temperatures in a hybrid adsorption-compression refrigeration system |
Presented by Marcin Borcuch, PhD |
Conceptual design of a transcritical heat pump with CO2 refrigerant for wastewater heat recovery application research |
Presented by Jozef Jandačka, prof. Ing. PhD. |
Prototype of eutectic refrigeration system working with R1270 refrigerant |
Presented by Lukas Prakopavičius, MEng |
How changes in lubricant can address challenges associated with hydrocarbon refrigerant High Temperature Heat Pumps (HTHP) |
Presented by Manuel Muñoz Alonso |
Upcoming natural refrigerant-driven heating and cooling systems in India |
Presented by Sarun Kumar Kochunni, PhD |
Meeting of commissions B1, B2, E1, E2, flammability of refrigerants - show
an elevated auditorium in the main lobby, chaired by Peter Tomlein, Didier Coulomb, Richard Kuracina, 12:45 – 13:15
Submissions |
---|
IIR activities, commissions B1 and 2, E1 and E2 |
Presented by Didier Coulomb, Director |
Special compressors and components I
auditorium S3, 1. floor, chaired by Dariusz Butrymowicz, Oliver Javerschek, 13:30 – 14:45
Submissions |
---|
R744 HEAT PUMPS WITH EJECTORS: PROJECTS, OBJECTIVES AND RESULTS |
Presented by Oliver Javerschek |
Theoretical Analysis on the Thermal Performance of R600a, R290 and Their Mixtures in a Retrofit R134a Vapor Compression Refrigeration System |
Presented by ZHONGJIE HUAN, PhD: Thermal Engineering |
Intermarché with an R744 Ejector booster system operating 24/7/365 |
Presented by Carlos Filipe Ferreira |
Continuous Inline Measurement for Oil Concentration Ratio in Refrigerant |
Presented by Duc Tien Le, Master |
INVESTIGATION OF R744 AC & HEAT PUMP SYSTEMS FOR ELECTRIC VEHICLES WITH EJECTORS |
Presented by Reza Niroomand, Ph.D. |
Rotary, scroll, screw, ... compressors I
auditorium S2, 1. floor, chaired by Claudia Fabiane, Armin Hafner, 13:30 – 15:00
Submissions |
---|
Compressor durability evaluation with the R-1132(E) based refrigerant R-474A for high-efficient and high-performant BEV heat pump systems |
Presented by Christian Macrì |
Design of a CO2 plate freezer test facility with -50°C evaporation temperature |
Presented by Shuai REN, Doctor |
Experimental assessment of oil free liquid injection twin screw compressor for high temperature industrial applications |
Presented by Shuai Ren |
IMPACT OF REFRIGERANT TYPE ON LEAKAGE RATE AND RESULTING FLAMMABILITY RISK |
Presented by Jafar Esmaeelian |
A NOVEL MODELLING APPROACH FOR THERMODYNAMIC DATA OF REFRIGERANT-OIL MIXTURES |
Presented by Steffen Feja, Dr. rer. nat. |
Special compressors and components II
auditorium S3, 1. floor, chaired by Dariusz Butrymowicz, Michal Masaryk, 15:15 – 16:15
Submissions |
---|
Active shading system as a reduction of building cooling requirements |
Presented by Michal Masaryk, prof., Ing., PhD. |
EXPERIMENTAL INVESTIGATION OF A TWO-PHASE EJECTOR IN APPLICATION TO PROPANE SYSTEMS |
Presented by Dariusz Butrymowicz |
EXPERIMENTAL INVESTIGATIONS OF HYBRID VAPOUR COMPRESSION-EJECTION REFRIGERATION SYSTEM |
Presented by Dariusz Butrymowicz, Prof. |
Small water ejector chiller with on-off operated pump |
Presented by Peter Mlynár, doc., Ing., PhD. |
APPLICATION OF LOW-GWP REFRIGERANTS R1233zdE AND R1234zeE FOR LARGE SCALE EJECTOR REFRIGERATION SYSTEMS OPERATING UNDER REAL INDUSTRIAL CONDITIONS |
Presented by Dariusz Butrymowicz |
Rotary, scroll, screw, ... compressors II
auditorium S2, 1. floor, chaired by Ivan Rangelov, Claudia Fabiane, 15:15 – 16:15
11.9.2024
Compressors and refrigerants
auditorium S2, 1. floor, chaired by Armin Hafner, Lambert Kuijpers, 09:00 – 10:30
Submissions |
---|
The future of technology research and development |
Presented by Alexander Cohr Pachai |
The 2024 F-gas Regulation and the challenges for the RACHP sector: presentation of the key provisions and the future steps. |
Presented by Vincent de Badereau, Engineering Master in Energy & Environment |
Eectronic databases in accordance with the regulations regarding F-gases in Poland |
Presented by Agnieszka Tomaszewska, dr inż. |
Business Development Manager East Europe |
Presented by Jaroslaw Stalewski, Mr |
Low GWP refrigerant for stationary applications |
Presented by Álvaro de León |
R-449A, R-744 and R-454C in Commercial Refrigeration: Impact on Efficiency and System Complexity |
Presented by Dominic Düing |